250,000 BTU Stainless Steel Direct Fired Forced Air Industrial Heater

  • 250,000 BTU Stainless Steel Direct Fired Forced Air Industrial Heater

250,000 BTU Stainless Steel Direct Fired Forced Air Industrial Heater

Item #:F130105 Model #: HS250AG
This 250,000 BTU heater is designed for greenhouse heating and or CO2 enrichment as well as horse stable heating. It is CSA and CE certified for use in greenhouses. It runs on Natural Gas or Liquid Propane and comes standard with a NG to LP conversion kit. The external housing, burner and combustion chamber are all made with high quality stainless steel to provide longevity. The combustion chamber is highly efficient resulting in a clean burn and ethylene content less than 0.6PPM. The HS250AG comes standard with automatic ignition and other safety features like an air flow switch, gas pressure switch, overheat monitoring, CO monitor and simple on-board diagnostics. It is designed to be suspended from the four stainless steel hanging bolts. HS250AG comes with a hook up for a local thermostat or can be set up to be managed by computer controlled thermostats. Other optional features include a delayed ignition relay so you can stagger start of multiple heaters, CO2 generator, moisture resistance starter and a remote failure alarm.

description

Details

This 250,000 BTU heater is designed for greenhouse heating and or CO2 enrichment as well as horse stable heating. It is CSA and CE certified for use in greenhouses. It runs on Natural Gas or Liquid Propane and comes standard with a NG to LP conversion kit. The external housing, burner and combustion chamber are all made with high quality stainless steel to provide longevity. The combustion chamber is highly efficient resulting in a clean burn and ethylene content less than 0.6PPM. The HS250AG comes standard with automatic ignition and other safety features like an air flow switch, gas pressure switch, overheat monitoring, CO monitor and simple on-board diagnostics. It is designed to be suspended from the four stainless steel hanging bolts. HS250AG comes with a hook up for a local thermostat or can be set up to be managed by computer controlled thermostats. Other optional features include a delayed ignition relay so you can stagger start of multiple heaters, CO2 generator, moisture resistance starter and a remote failure alarm.
  • High grade stainless steel exterior & burner - durable
  • 99% efficient
  • Generates CO2
  • 150ft Throw
  • Automatic ignition, easy to operate
  • On-board diagnostics
  • Easy installation - no chimney or drain pipe necessary
  • CSA Greenhouse Certified
  • NG-LP gas two different nozzles
  • Built-in Safety Devices:
  • Low voltage shut-off, Protects motor, Prevents CO build-up
  • IP65 grade dust & water protection
  • Flame sensor safety device
  • Air pressure switch
  • High limit switch
  • Failure alarm

product details

Additional Information

Weight (Lbs) 101
BTU per Hour 250000
Fuel Type Natural Gas or Propane
Minimum LP Tank Size
Minimum NG Line Size 3/4in
Electrical Rating 110 vac
Air Volume (CFM) 2,766 CFM
Gas Inlet Connection 3/4in
Gas Inlet Pressure Min 8in WC NG-LP
Gas Inlet Pressure Max 10in WC NG; 13in WC LP
Mounting Height Range 8ft - 12ft
Clearance to Combustibles: Horizontal Above 36in; Behind 36in; Sides 36in
Venting Required No
Venting: Air Intake No
Ducting No
Thermostat Optional No
Ignition Electronic
Item Length (in)
Item Width (in)
Item Height (in)
Item Weight (lb)
Warranty 1 Year Limited
Model HS250AG

Parts and Manuals

Product Downloads

This product does not have schematics at this time.

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register